Language
Chinese French Russian Spanish Portuguese Arabic English
+86 15002051250

WJTS110

Gate rod length: 490mm

Maximum bearing capacity of gate rod: 80kg

Power supply voltage: AC220V±10%/AC110V±10% 50~60HZ

Working voltage: DC12V

Input interface: dry contact signal; 12V level signal or DC12V pulse signal with pulse width >100ms, driving current >10mA

Traffic speed: 25~32 people/minute

Temperature: -25℃~+55℃

Relative humidity: ≦95% non-condensing

Technical Data

Gate rod length 490mm
Maximum bearing capacity of gate rod 80kg
Voltage AC220V±10%/AC110V±10% 50~60HZ
Operating voltage DC12V
Input interface Dry contact signal; 12V level signal or DC12V pulse signal with pulse width >100ms driving current >10mA
Traffic speed 25~32 people/minute
Temperature -25℃~+55℃
Relative humidity ≦95% non-condensing

Functions & Features

Mechatronics structural design, turntable with special craftsmanship, stable and reliable mechanical self-locking mechanism, precision gear and outer chassis combined structure;

It has a two-way traffic function, and the gate lever can be turned in two directions or one way (optional);

It is equipped with automatic fault detection function to facilitate maintenance and use;

It has a variety of working modes to choose from, including reading cards in both directions, or reading cards in one direction and blocking traffic in the other direction; and the working mode of the gate can be set through the buttons on the control panel (this function can also be set by PC control software)

It has reliable safety protection measures and has the function of automatically dropping the pole when power is off to meet the needs of fire escapes; when the power is restored, the gate can automatically close the gate pole;

It has an automatic reset function. After the pedestrian reads the valid card, if the pedestrian fails to pass within the time set by the system, the system automatically cancels the pedestrian's permission to pass;

Two-way traffic lights can be connected externally, and the lights can be used to indicate the traffic status; it can be passed or prohibited;

A two-way traffic counter can be connected externally to display the number of people passing in the direction of travel;

Can be connected to an external bidirectional card reader, which supports the WEIGNAD26/34 protocol reader;

It has an RS232 interface, which can communicate with the computer, and can also communicate with the computer through the LAN interface of the network cable;

With soft start function;

With voice module interface;

Equipped with automatic detection of stalled rotor and timeout protection function

Application Scenarios

Is there a problem?
WEJOIN Consultants are at your service!

400-168-6363

wejoin@wejoin.com.cn

Leave a message online